1. Previous
    Product 35 of 39
    This product was added to our catalog on Saturday 22 December, 2012.

    Pentair 2 in. Adapter Kit CVA-24T To Ortega Valve OVA2


    CVA-24T To Ortega Valve 2 in. Adapter Kit made by Pentair OVA2


    Used to adapt Compool CVA-24T Valve Actuator to 2" Ortega 3-port valve.


    • Adapter Plate
    • Cover O-ring Seal
    • Cover O-ring Seals (3ea.)
    • Shaft Coupling
    • Shaft Coupling Mounting Screws (2 ea.)
    • Valve Handle
    • Valve Knob


    1. Remove handle, cover, stop screw and o-ring seals from Ortega Valve. Save cover screws.
    2. Insert new O-ring Seals into bottom of Adapter Plate. Lubricate Seals with Compool Silicone Grease. In retrofit applications, it is advisable to remove the valve diverter and lubricate diverter seal at this time.
      • Valves should be inspected and serviced at lease once a year. The valve diverter should be well lubricated, the O-ring seals should be intact, and the diverter should fit snugly and rotate smoothly
    3. Mount Adapter plate to valve, using the existing cover screws.
    4. Attach Shaft Coupling to valve shaft. ensure that pointer is oriented in the direction of theopenvalve port. Secure Coupling with Mounting Screws. Tighten Screws completely.
    5. Attach Valve Handle to Valve Actuator, and secure with Valve Knob.
    6. Connect cable between Valve Actuator, and Power Center. Line-up and attach Valve Actuator to Shaft Coupling in this position, reverse the cable plug on the side of the Valve Actuator so that the Actuator rotates to the correct position.
    7. Secure to Adapter plate with Valve Actuator Mounting Screws.


Share Product

Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg

Manufacturer Info