DECK-O-SEAL Deck-O-Foam Expansion Joint Filler 1413035
[1413035]

Price:

Deck-O-Foam Expansion Joint Filler made by DECK-O-SEAL 1413035

1/2" x 3-1/2" x 50'

DESCRIPTION
DECK-O-FOAM expansion joint filler is a flexible, lightweight, non-staining, polyethylene, closed-cell expansion joint filler. It is a chemical-resistant, ultraviolet stable, non-absorbent, low density, economical, compressible foam that offers an extended service life in both interior and exterior applications.

DECK-O-FOAM is supplied with a convenient, pre-scored removable strip to provide a uniform sealing reservoir in the joint. It also serves as a sealant bond-breaker and provides an economical alternative as an expansion joint in all concrete paving projects. It is compatible with all currently available cold-applied sealants.

USES
DECK-O-FOAM is ideal for use as an expansion, contraction, and/or isolation joint in swimming pool decks, curb and gutter work, floor slabs, pavement patch repair, sidewalks, driveways, plazas, parking decks, highways, and airport runways.

FEATURES AND BENEFITS

Pre-scored strip is easily removed.
Economical alternative to expansion joints.
Controls amount of sealant needed and acts as a bond-breaker.
Eliminates costly sawing and routing.
Flexible, lightweight and can be formed around curved objects.
Easy to install.
Can be used in interior or exterior applications.

LEED INFORMATION
May help contribute to LEED credits:

MR Credit 5.1: Regional Materials: 10% Extracted, Processed & Manufactured Regionally
MR Credit 5.2: Regional Materials: 20% Extracted, Processed & Manufactured Regionally

TECHNICAL DATA**

.	TEST METHOD	TYPICAL VALUE
Color	N/A	Gray
Density	ASTM D 1622	2.0 lb./ft.(32.04 kg/m?)
Compression	.	.
10% Deflection	ASTM D 3575	10 psi (69 KPa) max.
80% Deflection	ASTM D 3575	125 psi (862.49 KPa) max.
Tensile Strength	ASTM D 3575	55 psi (379.50 KPa)
Water Absorption	ASTM D 3575	0.5% vol. max.
Temperature Stability	N/A	-40 F to 160F (-40C to 71C)
** These physical properties are typical, but should not be used in specifying material due to differences that could result from variations in testing methods.

APPLICATION
Attach DECK-O-FOAM securely to the existing concrete slab, coping or form with tape or mechanical fasteners prior to pouring the next slab. Make sure that DECK-O-FOAM is level with the desired slab surfaces before finishing. If specifications require the use of a cold-applied sealant, remove the pre-scored strip and apply the sealant following the manufacturers instructions.

Reviews