TruSeal Diverter 3-Way Valve 2 in. made by Waterway 600-7100-CPVC

Waterway positive seal diverter valves have been designed for the most demanding applications.
The TruSeal Valve is loaded with features and there is not a longer warranty in the industry.

• Diverter valve seal is Teflon laminated silicone
• Unique manufacturing process called TruSeal results in a seal that never needs lubrication
• TruSeal Valves have deeper sockets than other valves providing better glue joint bonding
• The exclusive Click & Lock handle has 72 locking positions / points for virtually any setting desired
• Exclusive Flow Labels gives your plumbing a professional look and more value
• Universal shaft spline pattern adapts to most actuators
• Waterway manufacturers all TruSeal Diverter Valves in the USA
• Valve Seal Lifetime Warranty
  

TRUSEAL TRIGGER LOCK HANDLE USE:

• NOTE: Valve handle must not be removed during use unless a valve actuator is installed. To turn handle squeeze trigger and move to desired position.

• OFF INDICATOR:

  • Off area on indicator represents the exact position of the internal valve diverter seal.

  HANDLE STOPS

  • Protruding stoppers located on valve cover will stop diverter in complete port shut-off position.

  TRUSEAL FLOW INDICATOR TAGS:

  • There are flow indicator tags that can be attached for your convenience, to ensure flow to the designated port. Be sure theINLETtag is positioned on the valve cover over the desired incoming flow port. NOTE: For some installations it may be desirable to permanently glue the flow indicator tags in place. When doing this, remove the lid/valve assembly from the valve body prior to gluing flow indictor tags. When replacing lid/ valve assembly hand-tighten screws evenly to ensure correct sealing. DO NOT over-tighten.

  Size:

  • ID................2 in. Slip(Socket)
  • OD..............2.5 in. Spigot